The Wheel Bench
£3,995 (inc. VAT)
This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand-alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor
The Cabin
From £295/night
The Bunkhouse
From £90/night
Shepherd's Hut
From £115/night
Weddings
with accommodation
Il Monte
Umbria, Italy
By mounting two pressure treated laminated timber circles opposite each other we have created a cylinder. An 800mm x 1200mm table was then fixed into the centre of the cylinder with two wooden seating sections either side. This leaves you with ample room for six people to be seated within. We have assembled this cylinder Wheel Bench using our signature parts of stainless steel, polycarbonate and timber.
Key Facts
Stainless steel roof to offer shade and reflect heat
Four laminated treated sustainable spruce timber arcs
Luxurious water resistant interior
Seating capacity for up to six guests
Fitted with removable table top
A foot print of no more than a standard garden patio set.
Accessories
An option of side detachable cover sheets are available as well as a winter cover though non of these are essential for keeping it outdoors. Freedom to adapt; By placing two or more wheel bench’s inline and adding a roof between each unit, we can create a multitude of different sized seating areas. This would be ideal for bars, restaurants and picnic areas and would offer many different ways to use the Wheel Bench in any outdoor area.
Extend Your Outdoor Seating and Extend Your Outdoor Season
Minimum Space With Maximum Seating!!
This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor.
All the parts of the Wheel Bench are manufactured from materials ideally suited to the outdoors. For extra comfort we supply seat pads in 3 different colours, charcoal, green and burgundy.
Installation
An area of 230cm x 145cm is required for the Wheel Bench to be installed. A hard base of no less than 175cm x 140cm is preferred to build your bench onto. The Wheel Bench should be installed onto an area of flat level ground.
Ground Preparation
If you are preparing new concrete or paving area for your Wheel Bench, we recommend on an overall depth of 30cm allowing 7 days for the ground to settle prior to the arrival of our fitting team.
Dimensions
Height: 218cm
Width:220cm
Depth: 135cm
Base are: 170cm x 135cm